Angle

Set the sweep magnitude around the chosen axis.

Location

Geometry workspace → Revolve → Angle

Initial value: 360[deg].

Units: deg. Enter a compatible quantity.

Set the sweep magnitude around the chosen axis. The current build takes the absolute value, so a negative angle does not reverse the sweep. Unitless values are radians; use 90[deg] for a quarter turn or 360[deg] for a full turn.

Using the value

Place the work plane and profile before the consuming operation in the sequence. Build All Geometry and inspect the profile or solid from more than one view.

Troubleshooting

Check the work-plane reference, local coordinates and axis direction. A planar profile alone is not a three-dimensional meshable volume.