ReferenceAvailable
PZT-5H coefficient set (Sun et al., 2020)
Use PZT-5H coefficient set (Sun et al., 2020) as a library material definition for matching physical conditions.
Use PZT-5H coefficient set (Sun et al., 2020) as a library material definition for matching physical conditions.
Where to find it
Materials → Library Material or Browse Materials
How to use it
Inspect the source, temperature range, property units and tensor orientation. Assign the material to the intended domains and check the active physics requirements.
Properties
| Property | Value (including units when dimensional) |
|---|---|
| rho | 7500[kg/m^3] |
| cE | [["126000000000[Pa]","79500000000[Pa]","84100000000[Pa]","0[Pa]","0[Pa]","0[Pa]"],["79500000000[Pa]","126000000000[Pa]","84100000000[Pa]","0[Pa]","0[Pa]","0[Pa]"],["84100000000[Pa]","84100000000[Pa]","117000000000[Pa]","0[Pa]","0[Pa]","0[Pa]"],["0[Pa]","0[Pa]","0[Pa]","23000000000[Pa]","0[Pa]","0[Pa]"],["0[Pa]","0[Pa]","0[Pa]","0[Pa]","23000000000[Pa]","0[Pa]"],["0[Pa]","0[Pa]","0[Pa]","0[Pa]","0[Pa]","23500000000[Pa]"]] |
| e | [["0[C/m^2]","0[C/m^2]","0[C/m^2]","0[C/m^2]","17[C/m^2]","0[C/m^2]"],["0[C/m^2]","0[C/m^2]","0[C/m^2]","17[C/m^2]","0[C/m^2]","0[C/m^2]"],["-6.5[C/m^2]","-6.5[C/m^2]","23.3[C/m^2]","0[C/m^2]","0[C/m^2]","0[C/m^2]"]] |
| epsS | [["1.505211929196e-08[F/m]","0[F/m]","0[F/m]"],["0[F/m]","1.505211929196e-08[F/m]","0[F/m]"],["0[F/m]","0[F/m]","1.3015656093636e-08[F/m]"]] |
Conditions
- Orientation: Material 3-axis is the poling axis.
- Reference state: Conditions were not reported with the source table; do not extrapolate.
- Symmetry: 6mm
References
Result
The assigned domains use the listed material properties in the next solve.
Troubleshooting
Do not extrapolate a constant or tabulated value outside its stated conditions without justification. A material name alone does not establish suitability for your experiment.